/ EN

PRODUCTS

Double cow looks at the quality of life as life

PRODUCTS

Hydroxypropyl methyl cellulose

basic information
A key phone
I want to inquire
Product description

1. Take the required amount of hot water into the container and heat to above 85., stir slowly and add the product gradually The cellulose initially floats on the water, but gradually disperses in water and forms homogeneous slurry. Goon stirring until it cools down and becomes clear

2. Another way is by heating the amount of 1/3 or 2/3 water to above 85℃, add the cellulose to obtain hot slurry, then add the remaining cold water and keep stirring, the mixture is obtained when the slurry cools to about 20 ℃

3. Cellulose's mesh is fine, and it 's in the presence of separate small particles in evenly stirred powder and can rapidly dissolve in water

4. Or add the cellulose slowly and evenly at room temperature and keep stirring until clear solution is obtained

 

Packaging, Storage and Transportation Considerations

The net weight of each barrel or bag(plastic coated PP woven bag lined with polyethylene film or card-board inside the bag sealing plastic bags. ) 25.0kg. Please prevent from the sun and rain and moisture during storage and transport.

 

Hydroxypropyl methylcellulose

(HPMC)

Viscosity rules

Dissolution Method

Note: The viscosity is of 2% aqueous solution at 20℃

*viscosity of 1% aqueous solution at 20℃

Depending on different requirements for viscosity, it may also meet appropriate

requirements

 

Physicochemical Properties

1. Exterior: White or off-white powder

2. particle size: the passing rate of 80 mesh is 100% the passing rate of 100 mesh is more than 99.5%

3. Charring density:280-300℃

4. Apparent density: 0. 25-0.70g/cm(usually around 0.5g/cm), the proportion is 1.26-1.31

5. Thermochromic temperature: 190-200℃

6. Surface tension: 2% of aqueous solution is 42-56dyn/cn.

7.Solubility: soluble in water and some organic solvents, such as ethanol & water in appropriate proportion, dioxoethane etc. Aqueous solution is surface-active, transparent with stable property. Products with different specifications gel at different tempera-tures and their solubility changes with viscosity: the lower the viscosity, the greater the solubility is HPMCS with different specifica-tions have different properties. The solution of HPMC in water is not affected by PH

8. When methoxy content decreases, HPMCS gel point increases, ts solubility in water and surface activitydecrease.

9. HPMC also has the following characteristics thickening, salt exclusion, ow ash content, stability in PH and dimension, water retention, excellent film-forming property, as well as broad enzyme resistance, dispersity and cohesiveness

Main Uses

This product is industrial grade HPMC, mainly used as the dispersing agent for PVC production and as the main assistant used in producing PVC suspension polymerization, It is also used as thickener, stabilizer, emulsifier, excipient, water retention agent, and film-forming agent etc. in producing petrochemicals, building materials, paint removers, agricultural chemicals, inks, textiles, ceramics, paper. cosmetics and other products. In terms of the application in synthetic resin, it can make the products loose with regular particles, appropriate apparent gravity and good processing properties, which almost replaces gelatin and polyvinyl alcohol as dispersant. Another use is in the construction process industries, mainly for mechanized construction like building walls, stuccoing and caulking: with high adhesive strength, it can also reduce cement dosage, especially in decorative construction for pasting tiles, marble and plastic trim. When used as a thickener in the coatings industry. it can make coating shining and delicate, prevent power from falling off, and improve leveling properties When used in wall plaster, gypsum paste, caulking gypsum, and waterproof putty, its water retention and bonding strength will be significantly improved. Moreover, t can also be used in areas like functional ceramics, metallurgy, seed coating agents, water-based inks, cosmetics, electronics, printing and dyeing, paper etc

On a
HPMC
The next article
Hydroxypropyl methyl cellulose